Vector Swing LULA: Features

Cab Features

• The platform size is 36" or 42" x 60" or 66" sided by 80" high panels.
• Cab walls can be trimmed in a variety of Laminates.
• Stainless steel trim & kick plates.
• The ceiling consists of two pot lights and almond plastic laminate.
• When car is in operation, it overrides hall call stations to give exclusive use of the unit to the occupant.
• Unlimited cab configuration designs within the constraints of existing code.
• Sturdy, hollow structure steel cab construction.
• Brushed stainless steel trim.

Door Features

• Easy and simple "push/pull" swing door operation.
• Fire rated swing door sets shipped pre-hung with hardware pre-assembled for easy installation.
• Manual or automatic power "multi - fold" gates at all car openings.

Hydraulic Drive

• The controller is mounted directly to a power unit.
• Each unit is factory tested prior to shipping.

The System Features include:

• Submersible screw pump for quiet and smooth operation.
• Motor is sized for horsepower and voltage required at the job site.
• 208 v AC 3 phase, 600 v AC 3 phase, and 240 v AC 1 phase are available.
• The relief valve is set at 125% of rated load.
• Manual lowering valve to lower the elevator in case of emergency.
• Down electrical solenoid for normal and emergency operation.
• Upwards acceleration adjustment for smooth start.
• Ball valve isolates supply lines and cylinder from the pump unit.
• Car stops automatically at each landing.
• Piston used is either single stage or two stage synchronized depending on the 2:1 cable. Hydraulic is also available for low overhead and high travel operations.

Swing Door Features

• The door and frame assembly carries a fire label from Warnock-Hershey, certifying they have been tested and approved for a minimum of 1 1/2 hour fire separation.
• 2 speed adjustable door closers (delayed action closer optional).
• 3 sets of heavy duty ball bearing hinges.
• Vision panels of (4"x 20").
• Hallway controls consist of a single illuminated call button and an optional key switch.
• The key is removable only in the off position.
• Hallway controls are mounted on a stainless steel plate.
• 3'0 x 6'8 doors and frames carrying "B" label for 1 1/2 hour separation rating.
• Prime coated ready for paint.

Warranty

Your investment is protected by a Two Year limited warranty against proven defective parts as a result of proper and normal use.