Summit Residential Lift: Features
Cab Features
- The platform size is 36" x 60" sided by 80" high melamine panels finished to meet architect specifications.
- Stainless steel trim and kick plates.
- Stainless steel trim & kick plates.
- The car control station consists of "Up" and "Down" mushroom head buttons.
- A red emergency stop button will activate a distinctive multi-tone alarm.
- A multi-bulb florescent light is mounted above the aluminum egg crate ceiling.
- The key switch is designed to over-ride hall call stations, to give the use of the unit to the occupant.
Controls
- Relay logic controller for reliable, trouble-free service.
- Constant pressure controls.
- Battery backup and manual emergency lowering.
- Door automatically unlocks when the lift reaches the appropriate level and the occupant simply pushes the door open.
Hydraulic Drive
- The controller is mounted directly to a power unit.
- Each unit is factory tested prior to shipping. The system features include:
- Submersible screw pump for quiet and smooth operation.
- Motor is sized for horsepower and voltage required at the job site.
- 208 v AC 3 phase, 600 v AC 3 phase, and 240 v AC 1 phase are available.
- Manual lowering valve to lower the lift in case of emergency. The relief valve is set at 125% of rated load.
- Down electrical solenoid for normal and emergency operation.
- Upwards acceleration adjustment for smooth start.
- Ball valve isolates supply lines and cylinder from the pump unit.
- Car stops automatically at each landing.
- Piston used is either single stage or two stage synchronized depending on the 2:1 cable. Hydraulic is also available for low overhead and high travel operations.
- Telescopic cylinders, two or three stage available for those travel restrictions.
Machine and Rails
- Elevator 8 lb. "T" rails are used for stability.
- Standard elevator guide shoes are used.
Safety Features
- Doors lock automatically to prevent unauthorized use.
- Unit will not move unless all doors are locked both mechanically and electrically.
- Emergency stop in cab.
Standard Features
- The easiest for the physically disabled to operate.
- Unit is constructed sturdy, & complies with CSA code CAN3-B355-00.
- Flexible design to meet your building requirements within design limitations. Your dealer can provide you with more details.
- The doors on these units have a one and a half hour fire rating.
- The operation of the unit is smooth and quiet.
- Unit stops automatically at all landings.
- The unit will not move unless all doors are locked both mechanically and electrically.
- The ceiling tiles are fabricated from aluminum egg crate.
- The unit has polished stainless steel trim and control panel.
- You have a choice of handsome melamine composite panel color and patterns.
Swing Door Features
- The door and frame assembly carries a fire label, certifying they have been tested and approved for a minimum of 1 1/2 hour fire separation.
- 2 speed adjustable door closers (delayed action closer optional).
- 3 sets of heavy duty hinges.
- Vision panels of 4"x 20" clear wired glass.
- CSA approved mechanical and electrical locking interlock-both have to be closed before lift will move.
- Door equipped with stainless steel pull handles and 4" x 16" stainless steel push plates.
- Hallway controls consist of an "Up" button, "Down" button and a key switch.
- All constant pressure switches have a mushroom head design.
- The key is only removable in the off position.
- Hallway controls are mounted on a stainless steel plate.
Warranty
Your investment is protected by a Two Year limited warranty against proven defective parts as a result of proper and normal use.
